http://myhomelab.blogspot.com/2013/05/installing-mikrotik-routeros-under-VirtualBox.html
Since I’ve finally gotten around to building a decent VirtualBox installation, this may be useful/fun.
http://myhomelab.blogspot.com/2013/05/installing-mikrotik-routeros-under-VirtualBox.html
Since I’ve finally gotten around to building a decent VirtualBox installation, this may be useful/fun.
http://www.cyberciti.biz/cloud-computing/use-vagrant-to-create-small-virtual-lab-on-linux-osx/
Good step through on a Vagrant setup.
Last night I finally got around to doing a little bit with the Pogo Mobile units I had installed Debian on. Not much so far, just got dnsmasq loaded on the unit that will become my DHCP and DNS server (replacing the same functionality on my router, so the next time I swap out a router I don’t have to worry about transferring internal DNS or DHCP reservations).
Haven’t done much of anything with the unit that I will be configuring as a CA, but did run across a couple of good reads on how to do a CA “right”. The OCSP article fills in a piece I’d like to have if I’m going to go to the trouble of setting up my own CA “for real”.
I stopped at Charter yesterday and exchanged one of my digital cable tuners for a CableCard, so I am anxious to get my HDHomeRun set up and start playing with it. I don’t like the way my CATV cable is organized, and it’s also older RG-59. Having purchased some RG6, I’m now in the process of centralizing that system, pulling new cable to at least a couple of locations, and will probably use the opportunity to put an ethernet drop in my garage as well.
http://sickbits.net/nagios-deployment-automation-tips-and-tricks/
Specifically with Nagios in the case above.
http://www.linux.com/learn/tutorials/431119:weekend-project-using-git-to-manage-config-files
http://www.networkassassin.com/foss-solution-for-network-configuration-backups/
Great use of EEM to backup config. It would be interesting to integrate Puppet into this setup and have the system receiving the configs first diff to see if there were any changes, then check with the puppetmaster to make sure everything was kosher.
RockTek RT-A1, priced at $65 on NewEgg Flash on 1/5/15. Quad core, HDMI output up to 2048 x 1536. Appears to be only a 10/100 ethernet, but has a couple of USBs to which GigE adapters could be connected for up to 480Mbit theoretical throughput. Also has a composite video out, which could theoretically be paired with one of these 4.3″ LCD “backup camera” displays for a convenient method to apply updates, etc. Caveat is that there does not seem to be much hackery on it to run Linux natively, but it is tempting to pick one or two up to play with and see what could be done.
Also ran across this Foxconn AT-5570 (manufacturer page here, also on sale at NewEgg Flash for $90, though it would need to have RAM and storage added). Higher price and lower performance would make this somewhat less appealing.
The Foxconn was perhaps most interesting because it led me to the Jetway motherboards with multiport ethernet daughterboards. This auction page had a six port GigE model. The four port daughterboard is the Jetway ADE4RTLANG, and several of the Jetway mini-ITX mainboards include dual ethernet ports natively. Quite a bit higher priced, but might prove useful at some time.
Also interesting was the Odroid-C1 currently selling at the same price as the RPi, and their intro/getting started kit with the required SD card as well as a breakout board and some basic electronic components to get familiar with the device is on sale for under $70 through January 7th when paying with PayPal. The C1 is, I believe, almost pin-compliant with the header on the RPi. It has a quad core 1.5GHz processor, 1GB DDR3, and a gigabit ethernet interface.
http://linuxgizmos.com/ringing-in-2015-with-40-linux-friendly-hacker-sbcs/
Pretty good board list, including a couple with dual ethernets, which is something I’ve been wanting to have.